Mold Star 31T
Product Code:SOSMS31TG
An easy to use translucent platinum silicone that cures into a soft, strong rubber that is tear resistant and exhibits very low long term shrinkage. Molds made with Mold Star 31 will last a long time and are good for casting wax, gypsum, resins, concrete and other materials. Cured rubber is heat resistant up to 450°F (232°C) and suitable for casting low-temperature melt metal alloys. Features relatively low viscosity and vacuum degassing is not required for most applications. Has been tested and certified skin safe by an independent laboratory.
Can be thickened with Thi-Vex for brush-on application. An infinite number of color effects can be achieved by adding Silc Pig silicone pigments or Cast Magic effects powders. Although not usually necessary, a release agent (Ease Release 200) will make demolding easier. Note: This product will not cure against surfaces containing sulfur, even when sealed.
Technical Data Sheet
Mixing Ratio: 1A:1B by Volume or by Weight
Viscosity: 11 000 cps
Pot Life: 5 Minutes
Cure Time: 23 Minutes
Shore A Hardness: 30A
Color: Translucent
Weight:
Pint: 2 lb
Gallon: 16 lb
Can be thickened with Thi-Vex for brush-on application. An infinite number of color effects can be achieved by adding Silc Pig silicone pigments or Cast Magic effects powders. Although not usually necessary, a release agent (Ease Release 200) will make demolding easier. Note: This product will not cure against surfaces containing sulfur, even when sealed.
Technical Data Sheet
Mixing Ratio: 1A:1B by Volume or by Weight
Viscosity: 11 000 cps
Pot Life: 5 Minutes
Cure Time: 23 Minutes
Shore A Hardness: 30A
Color: Translucent
Weight:
Pint: 2 lb
Gallon: 16 lb
- Quantity Available: 0
- Availability: Out of stock