- SIAL>
- Econ 60
Econ 60
Product Code:SOREC60P
An economical and fast curing urethane rubber that has no odor. Low viscosity for easy mixing and pouring. Used to make limited run production rubber molds, stamping pads, rubber prototype parts, rubber props and pour-in-place gaskets for industrial equipment. Also suitable for coating fabrics. Easy to color with SO-Strong, UVO or Ignite. To prevent adhesion between the rubber and model surface, models made of porous materials (gypsum plasters, concrete, wood, stone, etc...), must be sealed (with SuperSeal or One Step) prior to applying a release agent. A shellac is suitable for sealing modeling clays that contain sulfur or moisture (water based) and thermoplastics (polystyrene). A release agent (Universal Mold Release) is necessary to facilitate demolding when casting into or over most surfaces.
Technical Data Sheet
Mixing Ratio: 1A:1B by Weight or Volume
Viscosity: 1400 cps
Pot Life: 6 Minutes
Demold Time: 16 Hours
Shore A Hardness: 60A
Color: Translucent Amber
Weight:
Pint: 2 lb
Gallon: 16 lb
5 Gallons: 80 lb
Technical Data Sheet
Mixing Ratio: 1A:1B by Weight or Volume
Viscosity: 1400 cps
Pot Life: 6 Minutes
Demold Time: 16 Hours
Shore A Hardness: 60A
Color: Translucent Amber
Weight:
Pint: 2 lb
Gallon: 16 lb
5 Gallons: 80 lb
- Quantity Available: 4
- Availability: In stock